| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172 |
- package ansi
- // C1 control characters.
- //
- // These range from (0x80-0x9F) as defined in ISO 6429 (ECMA-48).
- // See: https://en.wikipedia.org/wiki/C0_and_C1_control_codes
- const (
- // PAD is the padding character.
- PAD = 0x80
- // HOP is the high octet preset character.
- HOP = 0x81
- // BPH is the break permitted here character.
- BPH = 0x82
- // NBH is the no break here character.
- NBH = 0x83
- // IND is the index character.
- IND = 0x84
- // NEL is the next line character.
- NEL = 0x85
- // SSA is the start of selected area character.
- SSA = 0x86
- // ESA is the end of selected area character.
- ESA = 0x87
- // HTS is the horizontal tab set character.
- HTS = 0x88
- // HTJ is the horizontal tab with justification character.
- HTJ = 0x89
- // VTS is the vertical tab set character.
- VTS = 0x8A
- // PLD is the partial line forward character.
- PLD = 0x8B
- // PLU is the partial line backward character.
- PLU = 0x8C
- // RI is the reverse index character.
- RI = 0x8D
- // SS2 is the single shift 2 character.
- SS2 = 0x8E
- // SS3 is the single shift 3 character.
- SS3 = 0x8F
- // DCS is the device control string character.
- DCS = 0x90
- // PU1 is the private use 1 character.
- PU1 = 0x91
- // PU2 is the private use 2 character.
- PU2 = 0x92
- // STS is the set transmit state character.
- STS = 0x93
- // CCH is the cancel character.
- CCH = 0x94
- // MW is the message waiting character.
- MW = 0x95
- // SPA is the start of guarded area character.
- SPA = 0x96
- // EPA is the end of guarded area character.
- EPA = 0x97
- // SOS is the start of string character.
- SOS = 0x98
- // SGCI is the single graphic character introducer character.
- SGCI = 0x99
- // SCI is the single character introducer character.
- SCI = 0x9A
- // CSI is the control sequence introducer character.
- CSI = 0x9B
- // ST is the string terminator character.
- ST = 0x9C
- // OSC is the operating system command character.
- OSC = 0x9D
- // PM is the privacy message character.
- PM = 0x9E
- // APC is the application program command character.
- APC = 0x9F
- )
|